1:Push the moon lighting tower to the workplace and place it stably, and press down the locks of the two universal wheels to lock the wheels to ensure that the generator does not move.
2:Put the lifting air rod flat on the generator frame, put the end with two fixing screws towards the air pump, and put down the two screws facing the two holes on the generator frame, and lock it with the unscrewed butterfly nut. Then vertically erect the air rod, let the fixed shaft at the bottom of the air rod be inserted into the fixed hole, and then tighten the left cross thumb screw.
3: Shake the air rod to confirm that the air rod is firm, then take out the lamp head, put the fixed sleeve in the middle of the lamp panel on the smaller shaft at the top of the lifting air rod, and then lock the fixing knob screw, and then connect the air rod to the output line with the aviation plug Connect with the aviation socket on the lamp panel and tighten; then insert the Φ8 air pipe into the air inlet valve hole in the middle of the bottom of the air rod; then insert the input cable with the aviation plug end at the bottom of the air rod into the right output aviation socket on the control box on the generator frame .
